Worker Dragged Into Mixer
A worker was killed when he was dragged into a rotating concrete mixer while he was cleaning it. He had completed a pressurized concrete pour at a construction site. He then returned to the company
A worker was killed when he was dragged into a rotating concrete mixer while he was cleaning it. He had completed a pressurized concrete pour at a construction site. He then returned to the company
Most victims of heavy machinery collisions are workers, but occasionally passersby are also struck by equipment. For example, a street sweeper moving at about two miles an hour (three kilometers an hour) knocked down an
A crew was digging a small tunnel under a driveway using a horizontal boring machine in preparation for installing an underground telephone cable. The rod had been removed from the hole. While it was still
A lead hand employed by a heavy equipment dealer was responsible for operating a grader and a simple conveyor system. The conveyor was being used to separate topsoil. The conveyor was set on the diagonal,
Co-workers saw an 18-year-old laborer being pulled between the rotating paddles of a portable mortar mixer. The young worker was working at a residential construction site, cleaning the mixer for the next day’s work, when
A punch press operator was killed when a punch struck him in the chest, puncturing his heart. He had been working in a plant where construction machinery was manufactured and repaired. He had been operating
A shift supervisor in a paper mill bled to death after both his arms were caught between two paper machine rollers. He entered an unguarded metal walkway that provides access to the area without first
A supervisor died when he was pulled into the paddles of a food mixing machine. The sleeve of his coat caught in the rotating machinery, which lacked a guard to prevent such contact. He was
A makeshift attempt to free a jammed conveyor cost a millwright his life. He got a grip on the conveyor drive shaft with a long pipe wrench, then straddled the pipe wrench handle and bounced
A truck driver was crushed to death between the frame and dump box of a dump truck. He had been raising the dump box when the safety over-travel cable joining the truck frame and box
A worker, who had recently been given the responsibility of safety inspector for the gravel pit where he worked, was killed when he was crushed in a piece of moving machinery. He was trying to
A cleanup person was instructed by his foreman to do the cleanup of a conveyor area jammed with debris. This involved loading the debris onto the conveyor, running it until it was clean, shutting it
A fitter went into a concrete batching plant to do some repairs while the plant was still in use. As the sand he was standing on was discharged from the hopper into a mixing vehicle
An employee with less than two years experience at a quarry and gravel pit was given the responsibility of safety inspector. He was not given any additional training with his new position. On the day
A mill supervisor was killed when he was hit by a piece of a door which blew off an anvil chipper. The incident occurred when a chipper saw knife fell into the conveyor system and
Failure to maintain equipment resulted in a fatal explosion in a metal products plant. Oil that had oozed from a hydraulic press caught fire. The fire caused two hydraulic fluid accumulators to explode.
A laborer working as a helper on a bark boiler in a paper mill was trying to unjam a blockage on a conveyor. The jam was preventing bark from moving into the boiler to be used as fuel.
Two plumbers had been working in a construction trench. When it was time to come back up to the street level, they rode in the bucket of an excavator. As the excavator operator started to
An appliance repairman was electrocuted when he was testing a defective washing machine. He was running the machine to determine the problem before attempting repairs. He had one hand on the control dial and the
A worker knowingly walked into a dangerous area and was hit by a heavy object as it fell. He was working at a plant which dismantles large machinery. Metal was cut with torches and large
An experienced crane operator was running an electrically powered gantry crane in a process building which was in the final stages of construction. Other than the occasional use of a propane-powered forklift, there were no
An overhead crane operator died when a bale of steel slipped off the C-hook and hit him. He had positioned the bale incorrectly on the C-hook, so it was not balanced and centered. Ordinarily he
Just as you use a checklist to inspect equipment, you [...]
The office environment has relatively few hazardous chemicals and no [...]
Are you new here? Use this checklist to make sure [...]
Phone Number: 800.774.2755
Fax: 800.326.2864
Email: support@coactionspecialty.com
Coaction Specialty Insurance
412 Mount Kemble Ave.
Morristown, NJ 07960
Report the loss as soon as possible to claims@coactionspecialty.com or call 800.774.2755 (Option #1 for reporting a new claim, Option #2 for all other existing claims).
Immediately. When filing a claim, notify Coaction by contacting us either via email at claims@coactionspecialty.com, by phone at 800.774.2755 (Option #1 for reporting a new claim, Option #2 for all other existing claims) or fax 800.326.2864.

Terms of Use | Legal Notice & Privacy Policy
Copyright 2020 SafetyNow ILT – a product of Bongarde Media
