Fitter Gets Sucked Into Sand Hopper
A fitter went into a concrete batching plant to do some repairs while the plant was still in use. As the sand he was standing on was discharged from the hopper into a mixing vehicle
A fitter went into a concrete batching plant to do some repairs while the plant was still in use. As the sand he was standing on was discharged from the hopper into a mixing vehicle
An employee with less than two years experience at a quarry and gravel pit was given the responsibility of safety inspector. He was not given any additional training with his new position. On the day
A mill supervisor was killed when he was hit by a piece of a door which blew off an anvil chipper. The incident occurred when a chipper saw knife fell into the conveyor system and
A worker was standing on a catwalk, using a vacuum with a long nozzle to clean a fast-moving conveyor belt. It appears the nozzle became caught between two large rollers and pulled the worker into
A shortcut across a moving conveyor belt was a fatal decision for a worker. He was watching the conveyor when he noticed a piece of timber fall to the floor instead of into the waste
A millworker died when the bulldozer he was driving rolled down an embankment. A lightning strike had caused a fire in the sawmill area. The fire department brought the fire under control and left the
Failure to maintain equipment resulted in a fatal explosion in a metal products plant. Oil that had oozed from a hydraulic press caught fire. The fire caused two hydraulic fluid accumulators to explode.
A steel drum containing lubricating oil exploded while a worker was heating it with a propane torch. The explosion occurred in cold winter weather in a temporary logging camp. The victim was preparing to replace
A truck with a trailer was traveling on a two-lane gravel packed road when the passenger-side wheels went over onto the soft shoulder. The driver attempted to steer the truck back onto the road and
A laborer working as a helper on a bark boiler in a paper mill was trying to unjam a blockage on a conveyor. The jam was preventing bark from moving into the boiler to be used as fuel.
Two plumbers had been working in a construction trench. When it was time to come back up to the street level, they rode in the bucket of an excavator. As the excavator operator started to
An appliance repairman was electrocuted when he was testing a defective washing machine. He was running the machine to determine the problem before attempting repairs. He had one hand on the control dial and the
Two boys were visiting a farm. One was a relative of the farmer and the other was a friend. For some reason, they climbed to the top of a silo which was used for storage
A worker knowingly walked into a dangerous area and was hit by a heavy object as it fell. He was working at a plant which dismantles large machinery. Metal was cut with torches and large
A pick-up driver was on his way to work for the evening shift at a road construction site. He was running slightly late, which was unusual for him, as he was a punctual, dependable and
A heavy equipment operator was killed in an explosion when he hit a natural gas pipeline with a piece of heavy machinery. Four other workers were severely burned. The operator was digging a drainage trench
A mill worker fell to his death when an unfinished overhead walkway fell apart. The catwalk was constructed at a sawmill so maintenance workers could reach machinery for oiling. The person building the catwalk was
A manager in a paper plant was draining a tank filled with wood pulp treated with chlorine dioxide, a corrosive material. During the process, some of the chlorine dioxide spilled. He tripped and fell into
An experienced crane operator was running an electrically powered gantry crane in a process building which was in the final stages of construction. Other than the occasional use of a propane-powered forklift, there were no
A farmer was crushed by his own tractor when another person was attempting to operate it. The victim was adjusting the spreader which was being towed behind the tractor. Another person tried to put the
An overhead crane operator died when a bale of steel slipped off the C-hook and hit him. He had positioned the bale incorrectly on the C-hook, so it was not balanced and centered. Ordinarily he
It’s important to warn your workers about the different heat-related [...]
There are at least 8 ways for supervisors to determine [...]
Lift trucks are handy tools found on the sites of [...]
Just as you use a checklist to inspect equipment, you [...]
Phone Number: 800.774.2755
Fax: 800.326.2864
Email: support@coactionspecialty.com
Coaction Specialty Insurance
412 Mount Kemble Ave.
Morristown, NJ 07960
Report the loss as soon as possible to claims@coactionspecialty.com or call 800.774.2755 (Option #1 for reporting a new claim, Option #2 for all other existing claims).
Immediately. When filing a claim, notify Coaction by contacting us either via email at claims@coactionspecialty.com, by phone at 800.774.2755 (Option #1 for reporting a new claim, Option #2 for all other existing claims) or fax 800.326.2864.

Terms of Use | Legal Notice & Privacy Policy
Copyright 2020 SafetyNow ILT – a product of Bongarde Media
