Forklift Flips, Kills Operator
A forklift overturned at a salvage lumber operation, fatally injuring the operator. The young worker had been asked to move the forklift from the lumber storage area to the resaw area when he returned to
A forklift overturned at a salvage lumber operation, fatally injuring the operator. The young worker had been asked to move the forklift from the lumber storage area to the resaw area when he returned to
A recycling plant worker was slicing open bales of plastic bags as they went by him on a conveyor. He slipped and fell onto the conveyor. He was carried along the conveyor and buried under
About a half hour before the end of his shift, a warehouse worker was walking along a general usage aisle. The worker apparently didn't notice that a working forklift was also there. The forklift driver
A warehouse order selector died after jumping 16 feet (about five meters) from an elevated pallet on a forklift when the forklift began to overturn. The victim wore a safety belt and lanyard connected to
A drill press operator was working at his bench, cutting out wood frames for use in manufacturing furniture. Immediately behind him were several large piles of various sheets of plywood used in the construction of
A worker was killed when he was dragged into a rotating concrete mixer while he was cleaning it. He had completed a pressurized concrete pour at a construction site. He then returned to the company
Workers tending a paper manufacturing machine had to enter an narrow overhead platform above a moving press roller. One day a worker was on this 14-inch (.35-meter) wide platform structure. He was using a compressed
Most victims of heavy machinery collisions are workers, but occasionally passersby are also struck by equipment. For example, a street sweeper moving at about two miles an hour (three kilometers an hour) knocked down an
A crew was digging a small tunnel under a driveway using a horizontal boring machine in preparation for installing an underground telephone cable. The rod had been removed from the hole. While it was still
A lead hand employed by a heavy equipment dealer was responsible for operating a grader and a simple conveyor system. The conveyor was being used to separate topsoil. The conveyor was set on the diagonal,
An electrical engineer became fatally entangled in a piece of rotating machinery. The victim was a partner in a company installing new computerized equipment in a sawmill.
An employee at a mine was found strangled to death. The scarf he was wearing around his neck had become twisted around the rotating drill. To prevent such a tragedy from recurring, remember these safe
A poultry worker was fatally wounded when a co-worker inadvertently started the feather dryer tank he was cleaning. The incident occurred at a poultry ranch where birds are grown for food. The worker had been
Co-workers saw an 18-year-old laborer being pulled between the rotating paddles of a portable mortar mixer. The young worker was working at a residential construction site, cleaning the mixer for the next day’s work, when
A punch press operator was killed when a punch struck him in the chest, puncturing his heart. He had been working in a plant where construction machinery was manufactured and repaired. He had been operating
A shift supervisor in a paper mill bled to death after both his arms were caught between two paper machine rollers. He entered an unguarded metal walkway that provides access to the area without first
A supervisor died when he was pulled into the paddles of a food mixing machine. The sleeve of his coat caught in the rotating machinery, which lacked a guard to prevent such contact. He was
A makeshift attempt to free a jammed conveyor cost a millwright his life. He got a grip on the conveyor drive shaft with a long pipe wrench, then straddled the pipe wrench handle and bounced
A truck driver was crushed to death between the frame and dump box of a dump truck. He had been raising the dump box when the safety over-travel cable joining the truck frame and box
A worker, who had recently been given the responsibility of safety inspector for the gravel pit where he worked, was killed when he was crushed in a piece of moving machinery. He was trying to
A mechanical supervisor in a paper mill - with 23 years of experience in the industry - was inspecting a machine with two other supervisors. While repairs were being contemplated, the machine was left running
A cleanup person was instructed by his foreman to do the cleanup of a conveyor area jammed with debris. This involved loading the debris onto the conveyor, running it until it was clean, shutting it
A sawmill employee was operating an automated stacker when he noticed a board out of place on the top of the bundle of lumber. He left his work station and went to the stack to
An apprentice electrician was killed by contact with 525 volts while he was installing a switchgear for a large piece of machinery in a manufacturing plant. The victim was running a ground wire when he
A worker was running a machine called a slitter as part of a paper cup manufacturing operation. The press-like machine had heavy rollers. It was 2:30 a.m. . . . the worker was putting in
Phone Number: 800.774.2755
Fax: 800.326.2864
Email: support@coactionspecialty.com
Coaction Specialty Insurance
412 Mount Kemble Ave.
Morristown, NJ 07960
Report the loss as soon as possible to claims@coactionspecialty.com or call 800.774.2755 (Option #1 for reporting a new claim, Option #2 for all other existing claims).
Immediately. When filing a claim, notify Coaction by contacting us either via email at claims@coactionspecialty.com, by phone at 800.774.2755 (Option #1 for reporting a new claim, Option #2 for all other existing claims) or fax 800.326.2864.

Terms of Use | Legal Notice & Privacy Policy
Copyright 2020 SafetyNow ILT – a product of Bongarde Media
