Volunteer Plunges to His Death
A volunteer died of head and chest injuries when he fell 18 feet to a concrete floor while helping repair a community sports facility.
A volunteer died of head and chest injuries when he fell 18 feet to a concrete floor while helping repair a community sports facility.
A recycling plant worker was slicing open bales of plastic bags as they went by him on a conveyor. He slipped and fell onto the conveyor. He was carried along the conveyor and buried under
Workers tending a paper manufacturing machine had to enter an narrow overhead platform above a moving press roller. One day a worker was on this 14-inch (.35-meter) wide platform structure. He was using a compressed
A lead hand employed by a heavy equipment dealer was responsible for operating a grader and a simple conveyor system. The conveyor was being used to separate topsoil. The conveyor was set on the diagonal,
An electrical engineer became fatally entangled in a piece of rotating machinery. The victim was a partner in a company installing new computerized equipment in a sawmill.
A punch press operator was killed when a punch struck him in the chest, puncturing his heart. He had been working in a plant where construction machinery was manufactured and repaired. He had been operating
A makeshift attempt to free a jammed conveyor cost a millwright his life. He got a grip on the conveyor drive shaft with a long pipe wrench, then straddled the pipe wrench handle and bounced
A worker, who had recently been given the responsibility of safety inspector for the gravel pit where he worked, was killed when he was crushed in a piece of moving machinery. He was trying to
A cleanup person was instructed by his foreman to do the cleanup of a conveyor area jammed with debris. This involved loading the debris onto the conveyor, running it until it was clean, shutting it
A sawmill employee was operating an automated stacker when he noticed a board out of place on the top of the bundle of lumber. He left his work station and went to the stack to
An employee with less than two years experience at a quarry and gravel pit was given the responsibility of safety inspector. He was not given any additional training with his new position. On the day
A mill supervisor was killed when he was hit by a piece of a door which blew off an anvil chipper. The incident occurred when a chipper saw knife fell into the conveyor system and
A worker was standing on a catwalk, using a vacuum with a long nozzle to clean a fast-moving conveyor belt. It appears the nozzle became caught between two large rollers and pulled the worker into
A shortcut across a moving conveyor belt was a fatal decision for a worker. He was watching the conveyor when he noticed a piece of timber fall to the floor instead of into the waste
A millworker died when the bulldozer he was driving rolled down an embankment. A lightning strike had caused a fire in the sawmill area. The fire department brought the fire under control and left the
Failure to maintain equipment resulted in a fatal explosion in a metal products plant. Oil that had oozed from a hydraulic press caught fire. The fire caused two hydraulic fluid accumulators to explode.
A laborer working as a helper on a bark boiler in a paper mill was trying to unjam a blockage on a conveyor. The jam was preventing bark from moving into the boiler to be used as fuel.
A mill worker fell to his death when an unfinished overhead walkway fell apart. The catwalk was constructed at a sawmill so maintenance workers could reach machinery for oiling. The person building the catwalk was
An experienced crane operator was running an electrically powered gantry crane in a process building which was in the final stages of construction. Other than the occasional use of a propane-powered forklift, there were no
A farmer was crushed by his own tractor when another person was attempting to operate it. The victim was adjusting the spreader which was being towed behind the tractor. Another person tried to put the
An overhead crane operator died when a bale of steel slipped off the C-hook and hit him. He had positioned the bale incorrectly on the C-hook, so it was not balanced and centered. Ordinarily he
There are at least 8 ways for supervisors to determine [...]
Lift trucks are handy tools found on the sites of [...]
If you work around or on moving machinery, take a [...]
One of your key responsibilities in preventing machine injuries is [...]
Phone Number: 800.774.2755
Fax: 800.326.2864
Email: support@coactionspecialty.com
Coaction Specialty Insurance
412 Mount Kemble Ave.
Morristown, NJ 07960
Report the loss as soon as possible to claims@coactionspecialty.com or call 800.774.2755 (Option #1 for reporting a new claim, Option #2 for all other existing claims).
Immediately. When filing a claim, notify Coaction by contacting us either via email at claims@coactionspecialty.com, by phone at 800.774.2755 (Option #1 for reporting a new claim, Option #2 for all other existing claims) or fax 800.326.2864.

Terms of Use | Legal Notice & Privacy Policy
Copyright 2020 SafetyNow ILT – a product of Bongarde Media
