Forklift Fatality Carries Lessons
Forklifts and worker-congested pathways can be a deadly mix, especially when forklift operators haven't been trained properly.
Forklifts and worker-congested pathways can be a deadly mix, especially when forklift operators haven't been trained properly.
At 21, Catrina Faye Coffman had everything to look forward to.
In life, Jeffrey Mills made a difference. In death, he also made a difference, but with a huge impact.
It's said life begins at 40. Sadly, for Gregory Scott Johnson, it ended at that age when he became caught between two hydraulic cylinders used to pull logs toward a saw at the Suwannee Lumber Co. in Dixie County, FL.
An unsafe practice that was allegedly encouraged by his employer resulted in a 52-year-old man losing his life in December 2005.
A worker was hired to clean up and crush cars in an automobile junkyard.
A 23-year-old mill worker received a compound fracture to his foot when he tried to clear a conveyor jam.
Wearing gloves around moving machinery can be a recipe for disaster, as a recent fatality in Colorado illustrates.
A 17-year old worker died just one hour into his new job after becoming pinned under a forklift. He hadn't received any job orientation or training.
Could This Have Been You? A machine operator was killed when he lost control of the asphalt roller he was operating.
A 14-year-old accidentally hung himself with an electric hoist as he played with the dangerous piece of equipment. The incident occurred at an equipment rental company where the boy worked, helping customers load and unload
A worker received massive head injuries when a crane lifting a 54,600-pound piece of steel tipped over. The crane was unstable because one outrigger device, which extends from the crane to balance it was inoperable.
A drill press operator was working at his bench, cutting out wood frames for use in manufacturing furniture. Immediately behind him were several large piles of various sheets of plywood used in the construction of
Workers tending a paper manufacturing machine had to enter an narrow overhead platform above a moving press roller. One day a worker was on this 14-inch (.35-meter) wide platform structure. He was using a compressed
A lead hand employed by a heavy equipment dealer was responsible for operating a grader and a simple conveyor system. The conveyor was being used to separate topsoil. The conveyor was set on the diagonal,
An electrical engineer became fatally entangled in a piece of rotating machinery. The victim was a partner in a company installing new computerized equipment in a sawmill.
A shift supervisor in a paper mill bled to death after both his arms were caught between two paper machine rollers. He entered an unguarded metal walkway that provides access to the area without first
A worker, who had recently been given the responsibility of safety inspector for the gravel pit where he worked, was killed when he was crushed in a piece of moving machinery. He was trying to
A mechanical supervisor in a paper mill - with 23 years of experience in the industry - was inspecting a machine with two other supervisors. While repairs were being contemplated, the machine was left running
A cleanup person was instructed by his foreman to do the cleanup of a conveyor area jammed with debris. This involved loading the debris onto the conveyor, running it until it was clean, shutting it
A sawmill employee was operating an automated stacker when he noticed a board out of place on the top of the bundle of lumber. He left his work station and went to the stack to
An apprentice electrician was killed by contact with 525 volts while he was installing a switchgear for a large piece of machinery in a manufacturing plant. The victim was running a ground wire when he
A worker was running a machine called a slitter as part of a paper cup manufacturing operation. The press-like machine had heavy rollers. It was 2:30 a.m. . . . the worker was putting in
An employee with less than two years experience at a quarry and gravel pit was given the responsibility of safety inspector. He was not given any additional training with his new position. On the day
A worker was standing on a catwalk, using a vacuum with a long nozzle to clean a fast-moving conveyor belt. It appears the nozzle became caught between two large rollers and pulled the worker into
Phone Number: 800.774.2755
Fax: 800.326.2864
Email: support@coactionspecialty.com
Coaction Specialty Insurance
412 Mount Kemble Ave.
Morristown, NJ 07960
Report the loss as soon as possible to claims@coactionspecialty.com or call 800.774.2755 (Option #1 for reporting a new claim, Option #2 for all other existing claims).
Immediately. When filing a claim, notify Coaction by contacting us either via email at claims@coactionspecialty.com, by phone at 800.774.2755 (Option #1 for reporting a new claim, Option #2 for all other existing claims) or fax 800.326.2864.

Terms of Use | Legal Notice & Privacy Policy
Copyright 2020 SafetyNow ILT – a product of Bongarde Media
